Avoid harsh and damaging chemicals in commercial products. Learn to make your own all-natural body care products at home! Our expert advice articles below will help you get started.
Learn how to use essential oils safely and wisely, adding them to homemade body care products or using them in home diffusers.
There are so many natural ingredients to choose from when making your own products at home. Let us help you choose the right ingredients for you!
Our Homemade Personal Care Advice Articles are a great way to learn more about starting your own DIY project.
Learn how to use melt and pour soap bases for making all your own homemade soaps!
If you fancy yourself a DIY type but find the task of soap making daunting, there is an easy way to get started. Using a melt and pour soap base, you can avoid lye and other strong ingredients used when making cold process soaps, while still maintaining control of the additives in the finished product.
Melt and Pour Soap Bases are really just unscented white or clear blocks of soap, ready to use as is, if desired. We carry a variety of SFIC Melt and Pour Soap Bases that are easy and fun to use. Choose from an assortment of natural pigments, essential oils, and soap shaping molds to make personalized soaps to suit any taste. Soaps make wonderful homemade gifts, too!
Supplies for Making Melt and Pour Soap
- Knife or soap cutter
- Cutting board
- Double boiler
- Melt and Pour Soap Base
- Pigment powder (optional)
- Glycerin, if using pigment powder
- Essential oils (optional)
- Soap shaping mold
- Spray bottle of rubbing alcohol
Also see: Melt and Pour Soap Safety Considerations
Prepare and Melt Soap Base
- Using a clean knife and cutting board, cut soap base into 1-inch chunks.
- Place soap chunks in a double boiler to melt, to avoid overheating.
Add Colorant to Soap Base (optional)Keep in mind that a little pigment powder goes a long way.
- While the soap is melting, add desired pigment powder to 2-3 teaspoons glycerin. Mix thoroughly and add to the soap base as it melts, stirring gently to avoid creating bubbles in the soap.
- If bubbles do form, spray lightly with rubbing alcohol and bubbles should pop immediately.
- Remove soap mixture from heat.
Also see: How to Layer Colors in Melt & Pour Soap
Add Fragrance (optional)
- Once soap is completely melted and cooled slightly, add essential oils for fragrance. Add no more than 3 teaspoons essential oils per pound of soap base. Use one essential oil or create a blend.
Note: Too much added fragrance can irritate skin.
Pour Soap into Shaping Molds
- Make sure soap base is not too hot for molds. Mixture should be less than 145ºF before pouring.
- Pour soap mixture into molds. Tap gently to release any air bubbles.
- Spray surface of soap with alcohol, for a smooth finish.
- Cool 12-24 hours. Do not put molds in the freezer to cool.
- Remove soap from molds when set.
- If soap is difficult to remove, place mold in the freezer briefly before trying again. Do not leave in freezer longer than 1 hour.
Once you have some experience with melt and pour soap bases, there is no end to the soaps you can create, from layered soaps to soaps containing dried flowers, with a wide range of colors and fragrances to suit your taste.